Residential Framing Services

New homes, additions, remodels and basements — framed square, plumb and level.

Framing to your plans

Already have plans? We'll frame them.

Many of our customers are homeowners building their own home, families adding on, or builders who need a framing crew they can count on.

No plans yet? We can help with plans for any size project — from a basement finish to a new home.

To bid your job, send us

  • Your plans (PDF is fine) — or, if you don't have plans, photos and a description of what you want
  • Structural engineering, if any
  • Truss layout, if using trusses
  • The address and your target start date

New Home Framing

From the first sill plate to a dried-in shell, we frame new homes for builders and owner-builders along the Wasatch Front.

On a new home we handle the structure from the top of the foundation up. That means sill plates and the floor system, every exterior and interior wall, beams and posts, the roof — stick-framed or trusses — and the wall and roof sheathing that ties it all together.

Includes

  • Sill plates, beams and floor systems
  • Exterior and interior walls
  • Stick-framed roofs or truss setting
  • Wall and roof sheathing
  • Stairs, blocking and backing
  • Framing-inspection prep and corrections

Wall Framing

Straight, plumb walls laid out from the plans, with every header, corner and backing where it belongs.

Every wall starts with layout. We snap lines from the plans, mark plates for studs, openings and intersections, then build, stand and brace each wall. Once the walls are up we plumb and line them so every corner is straight before sheathing goes on.

Includes

  • Layout from the plans
  • Exterior and interior walls
  • Headers, beams and point loads
  • Shear walls and hold-downs per the engineering
  • Plumb-and-line before sheathing
  • Blocking and backing

Floor Framing

Floors that start flat and stay quiet — framed, glued and fastened to schedule.

A flat, stiff floor system makes everything above it easier to build. We set sill plates and beams, then frame the floor with dimensional lumber or engineered I-joists as the plans call for, with rim, blocking and squash blocks where loads come down.

Includes

  • Sill plates and beams
  • Dimensional or I-joist floor systems
  • Rim, blocking and squash blocks
  • Glued and fastened subfloor
  • Stair openings and framing
  • Cantilevers and bump-outs per plan

Roof Framing

Stick-framed roofs cut on site — ridges, rafters, hips and valleys built to the pitch and lines on the plans.

We lay out and cut ridges, common rafters, hips, valleys and jacks on site, with birdsmouth cuts that sit tight on the plates and rafter tails cut true for the fascia.

Includes

  • Ridges and common rafters
  • Hips, valleys and jack rafters
  • Dormers and roof transitions
  • Overhangs, fascia backing and rake detail
  • Ceiling joists, rafter ties and collar ties
  • Roof sheathing

Truss Setting

Roof and floor trusses set to the layout, braced right, with gable ends and overframing finished.

Trusses are engineered as a system, and they only perform as designed when they're installed that way. We set trusses to the truss layout and spacing, tie them to the walls with the specified connectors, and install temporary and permanent bracing per the truss manufacturer's drawings.

Includes

  • Setting to the truss layout
  • Connectors per the plans
  • Temporary and permanent bracing
  • Gable ends and overframing
  • Floor truss installation
  • Roof sheathing

Wall & Roof Sheathing

Sheathing installed so the house is tight, straight and ready for inspection, roofing and windows.

Sheathing does more than close in the house. On shear walls it's part of the structure, so we build them to the engineering and cut openings clean so windows and doors go in without a fight.

Includes

  • Exterior wall sheathing
  • Shear walls per the engineering
  • Roof decking
  • Clean window and door openings

Addition & Remodel Framing

New framing that ties into the old house so it lines up, carries its loads and looks like it was always there.

Older houses are rarely perfectly square or level. Framing an addition means reading what's already there and making the new work meet it cleanly — floors that line up at the doorway, rooflines that tie in, and walls that blend.

Includes

  • Room additions and bump-outs
  • Second-story additions
  • Bearing-wall removal with new beams and posts
  • Tie-ins to existing roofs and floors
  • Garages and attached structures
  • Interior remodel framing

Basement Framing

Basement walls, soffits and partitions laid out straight so the finished basement looks like the rest of the house.

We frame the perimeter walls, bedroom and bathroom partitions, closets, and soffits around ducts and beams, all laid out from your plan.

Includes

  • Perimeter and partition walls
  • Soffits around ducts and beams
  • Bedroom, bath and closet layout
  • Stair framing and railing blocking
  • Blocking and backing

For builders

A framing sub you can count on

We work from your plans and schedule, keep you posted, and leave every house ready for inspection.

  • Framed to the plans and engineering
  • Shear walls, hold-downs and beams where they're called out
  • Plumb-and-line before sheathing
  • Blocking and backing for the trades that follow
  • Clean, organized jobsites and straight answers

Paperwork

  • Licensed and insured in Utah
  • Certificate of insurance available on request
  • W-9 available on request

No job too small

Garages, shops, sheds, decks & pergolas

We mainly frame houses, but we're happy to take on smaller projects too — with the same crew and the same standard.

Detached garages & shops

Detached garages, workshops and shop buildings framed the same way we frame houses — walls, roof framing or trusses, and sheathing, built to your plans. Most need a building permit, so start with your city.

Backyard sheds

Storage sheds, workshops and garden sheds framed square with a solid floor and roof. Check your city and HOA rules on size, height and setbacks before you build — larger sheds often need a permit.

Decks & deck repair

New deck framing with proper ledger flashing and connectors, and repairs to rotted joists, loose posts and failing stairs. Soft boards, a wobbly railing or problems where the deck meets the house mean it's time for a look underneath.

Want the decking and railings too? Ask about it when you request a bid.

Pergolas

Freestanding or attached pergolas for patios and decks, with plumb posts, level beams and evenly spaced rafters.

Questions

Frequently asked questions

Can I hire you if I already have plans?

Yes — that's most of what we do. Homeowners, owner-builders and builders send us their plans, and we bid and frame them. You don't need a general contractor to hire a framer.

What if I don't have plans?

We can help with plans for any size project, from a basement finish to a new home. Tell us what you have in mind and we'll help you get plans together before we frame it.

What do you need to give me a bid?

Your plans if you have them — or a description of what you want to build — plus the address and your timeline. If you have structural engineering or a truss layout, send that too. You can attach plans right on the bid form.

Do you work for builders or homeowners?

Both. We frame for homebuilders and general contractors, and directly for homeowners and owner-builders.

How long does framing take?

It depends on the size and complexity of the house, trusses vs. stick framing, material deliveries, weather and inspections. We give you a schedule with your bid.

Where do you work?

All along the Wasatch Front, including Salt Lake County and Utah County. See our service areas.

Are you a licensed and insured framing contractor?

Yes. Hycraft Construction Inc. is a licensed and insured Utah framing contractor.

How soon can you start?

It depends on our schedule and yours. We'll give you a start date with your bid.

Is my project too small?

Probably not. Along with houses, we frame detached garages and shops and build sheds, decks and pergolas.

Have a set of plans ready to frame?

Send them with the address and we'll get back to you with a bid.